| Customization: | Available |
|---|---|
| Max.Head: | >150m |
| Max.Capacity: | >400 L/min |
|
Still deciding? Get samples of US$ 700/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
PRODUCT DESCRIPTION:
Maximum 40 Bar output pressure air booster pump station
TEREK pump adopt aluminum alloy and stainless steel materials ,Air boosters are suitable for the oil free compression of air, ATE Series are single acting and single stage driven type. This series of pump driven piston diameter is 80 mm.
TEREK pumps are air driven pressure from 3 to 8bar (43.5 to 116 psi) by the normal air compressor. Basically the theory of operation is similar to a reciprocating amplifier where control of the piston at the end position is regulated by a pilot operated way valve. Its function is to increase the air pressure in the working system by 2-4 times.
Use clean compressed air as the driving power source, gas booster pump for the pressure source, USES the pure air as pressure medium, the output is proportional to the gas is used to drive the air pressure and air pressure. Through the adjustment of air pressure is driven, can get the corresponding pressurized air pressure of a gas. When air pressure is driven with pressurized air gas pressure balance, pneumatic booster pump will stop, gas output air pressure is stable on the preset pressure. Thus has explosion-proof, energy-saving, environmental protection, adjustable output pressure, small volume, light weight, simple operation and reliable performance, widely used, etc.
PRODUCT DETAILS:
|
Type |
Pressure ratio |
Min gas inlet pressure PA |
Max gas inlet pressure PA |
Connection size(inch) |
||||
|
bar |
psi |
bar |
psi |
Drive |
Inlet |
Outlet |
||
|
ATR-2 |
2:1 |
3 |
43.5 |
8 |
116 |
G1/2 |
NPT 1/2 |
NPT 1/2 |
|
ATR-5 |
5:1 |
3 |
43.5 |
8 |
116 |
G1/2 |
ZG 1/2 |
ZG 1/2 |
PRODUCT PICTURES:
PACKAGING AND SHIPPING:
WHY CHOOSE TEREK PUMP:
Structure and reliable, long life, high stability, no electricity, simple maintenance.
Safety Operation:use gas driven, no arc and sparks, it can be used in hazardous locations.
• Flexible application:different series of pumps can be used to obtain different pressure intervals and flow intervals.
• Simple maintenance:Compared with other air-driving pumps,the pneumatic booster pump can perform the same job as other gas drive pumps, but with fewer parts and seals, and easier maintenance.
• Structure and reliable, long life, high stability, no electricity, simple maintenance.
• Automatic pressure holding, whatever the cause of the pressure drop, the pump will automatically start, keep the loop pressure constant
PUMP APPLICATIONS:
1.Compressed Air driven - no electricity required (connect to normal air compressor)
In order to extend the lifetime of the pump, the driving air pressure should not be higher than 8 bar
2. High quality seals, long life service available
3. All components of the contact with the gas are made of aluminum or stainless steel
4.Wide range of models with different ratios
5.Gas drive, No heat,flame or spark risk and explosion proof
6.Easy to install, operate and maintain
7. Automatic pressure holding, whatever the cause of the pressure drop, the pump will automatically start, keep the loop pressure constant
8. The air booster weighs about 30KG, which is easy to carry and can be configured according to the requirements.
COMPANY PROFILE:
ACCURATER SELECTION:
How to Select Pneumatic Air Boosters/Systems?
In order to choose the accurate and appropriate booster pump or systems for you,
Please kindly reply us the following questions:
1.What is the pressure of the current gas? ( )bar
2.What is the output pressure of the gas you want?( )bar
3.What is the driven air pressure ( Your air compressor) you can provide ?( )bar,
Because our booster pump is completely air driven and no need any electricity
4.How much of the outlet gas flow rate do you need?( )L/min
5. What is its purpose or application field you used it? Thanks
FREQUENTLY ASKED QUESTION:
Q1. Where is your factory located ? How can I visit there?
Our factory is located in Jinan city, Shang dong Province, China. We can go to Jinan airport and wait for your arrival.
Q2 : Do you have stock for all items?
A:In general, we have some stock, while if you need a bulk order, we still need time to produce it. Of course, we will inform all details you before your payment.
Q3. How long can be finished the goods ?
A : Sample order : within one week ;
Large order : 15-25 days ; According to your purchase quantity.
Q4. At which port do you usually ship the good?
We usually ship goods via Qingdao port of China.
Q5 : What is payment terms ?
A: Sample order : 100% full payment before start to production;
Large order : 30% deposit first, 70% pay after see the BL copy ;
Q6: Can give free sample ?
A : Free : if small spare parts and the cost not too much is ok ;
Not Free : the cost expensive and all the machine can not be free ;
Any more questions, please contact us, and welcome to add my skype or whatsapp for more details chat.
){kind=link}