| Customization: | Available |
|---|---|
| After-sales Service: | Technical Support and Services |
| Warranty: | 24 Months |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Product Description
The fluid pressurized control cabinet has been equipped with the fluid booster pump,the drive air water filter, the pressure regulator valve, pressure gauges and manual pressure relieve valve. The main parts of the equipment are assembled in closed stainless steel cabinet or stainless steel frames. The pressure gauge, valve and pressure regulator will be mounted on the panel. The corresponding sign will also be marked on the panel.
The ideal working high pressure can be achieved by adjusting the driving air pressure. When the driving air pressure and output pressure are balanced, the pump will automatically stop the filling pressure, and the output pressure will remain at the preset value.
The hydraulic device can be used for pressure testing of various components, research and testing institutions and industrial pressure field.
Booster pump have a variety of pressure ratios. These series of pumps are ideal choice for various hydraulic power operations. The maximum operating pressure up to 50000psi.
The output pressure is produced by pneumatic booster pump. Therefore the electric connection will not be necessary.
The structural design of the fluid pressurized control cabinet are compact. And according to the special requirement of customers, the air driven fluid booster pumps, valves, control switches and other precision accessories are assembled in the frame or closed cabinet.
The pump will stop working automatically when the output pressure reaches the preset value. The pump will start automatically when the outlet pressure drops slightly or the air drive pressure increases.
Product ParametersTEREK pumps feature is a large air piston joint to a smaller diameter piston. The pressure ratio is the difference of these two areas and is the method of determining maximum outlet pressure. Higher pressures obtained by using higher pressure ratios.
TEREK model reflect the pumps nominal pressure ratios, while the technical data indicates exact ratios. The outlet pressure is easily to set through a simple regulator. By multiplying the pressure ratio by the available shop air pressure, the nominal liquid pressure can be calculated. Basically the principle of operation is similar to a reciprocating amplifier where control of the piston at the end position is reciprocating.
The automatic reciprocating motion of the piston is controlled by a built-in four-way valve.
TEREK pumps are air driven at a drive air pressure of 3 to 8 bar (29 to 116 psi) by the normal air compressor.
LDD series booster pump:
Double acting, single air drive head
Diameter of drive plunger is 160 mm
The diameter of the drive cylinder:160 mm
Drive cylinder stroke: 50 mm
High pressure cylinder stroke: 50 mm
The maximum driving pressure of the drive air is 8 bar / 116 psi
Common Model Equipment Technical Specification Introduction
| Product name | Pneumatic liquid booster pump hydrostatic pressure testing bench |
| Model | LU-LDD-100 |
| Pressure ratio | 100:1 |
| Medium | Hydraulic oil or water |
| Drive air source pressure | 3-8bar. |
| Power source | TEREK liquid booster pump |
| Maximum liquid outlet pressure | 800bar / 11600psi. |
| When adjusting drive pressure to 5.0 bar | The high output pressure is 500bar / 7250psi |
| When adjusting drive pressure to 6.9 bar | The high output pressure is 690bar / 10000psi |
| Outlet pressure control unit | Drive air regulator valve |
| Pressure control accuracy | Less than 1%F.S; |
| Pressure measurement accuracy | 0.4 pressure gauge |
| Valves and piping | High pressure needle valve and stainless steel piping |
| Equipment frame type | 304 Stainless steel frame |
| Equipment weight | 35 KG |
| Export wooden case weight | 45 KG |
| Equipment dimension | 500*370*520 mm |
| Packing size | 560*450*570 mm |
| Connection size(inch) Outlet | NPT 1/4 Internal Thread |
| Production time | 12-15 working days. |
| Delivery method | Deliver the goods to your designated address by air express. |
| Air transportation time | 5-7 days. |
System Configuration
The liquid booster pump mainly consists of air drive chamber, pressurizing chamber, auto reversing valve, inlet check valve, outlet check valve, High quality sealing parts, air drive piston, pressurizing piston, silencer etc.
TEREK hydraulic test bench system mainly includes three sets of air driven liquid booster pump, 15L water tank, pressure gauges, liquid filter, air filter, air regulating valve, control valves, pipelines, cabinet, pressure release valve etc. The main parts of the equipment are assembled in closed stainless steel cabinet or stainless steel frames. The pressure gauge, valve and pressure regulator will be mounted on the panel. The corresponding sign will also be marked on the panel.
Product Description
1. Equipped with high quality pneumatic chemical reagent injection pump, it can easily achieve any adjustable and controllable output pressure and flow.
2. The contact liquid section is stainless steel, strong corrosion resistance, suitable for a variety of chemical reagents;
3. It can be used at various levels of wellhead pressure, the pressure system has control function.
4. Chemical reagent injection system output pressure is high. The output pressure can be adjusted through the pressure regulating valve, the system has to stop working under the set pressure;
5. Advanced technology, reasonable structure design. The features of small size, light weight, beautiful appearance;
6. By air/gas driven, no need to use electricity, there will be no spark generated, safe explosion-proof;
Our Services
2. We'd like to customize special machine according to customer's request.
3. We'd like to help our customers for booking ship as customer request.
5. Operation manual will be provided after shipment.
6. We provide one year warranty.
7. Free wearing parts will be sent together with the machine .
8. Working video of the machine will be sent to you accordingly to your need.
Company Information and workshop pictures
1.Q : Are you manufacturer ?
A: Yes, We are the manufacturer with continuous and improved R&D. Production, Quality Check and service supply.
2.Q : Can I get your price list ?
A: Yes, Sure. In order to send you our available offered price. Please choose the products and let us know the product model and requirement in detail.
3.Q : Do you have stock for all items?
A:In general, we have some stock, while if you need a bulk order, we still need time to produce it. Of course, we will inform all details you before your payment.
4.Q : What is payment terms ?
A: Sample order : 100% full payment before start to production;
Large order : 30% deposit first, 70% pay after see the BL copy ;
5.Q: Can give free sample ?
A : Free : if small spare parts and the cost not too much is ok ;
Not Free : the cost expensive and all the machine can not be free ;
6.Q : How long can be finished the goods ?
Delivery date: 5-12 working days after deposit paid
Two years warranty, when the products reach to destination.
){kind=link}