0.1bar Low Pressure Gas Pump Nitrogen Booster Pump

Product Details
Customization: Available
After-sales Service: Technical Support and Services
Warranty: 24months
Diamond Member Since 2019

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

Registered Capital
5000000 RMB
Management System Certification
ISO 9001, ISO 9000
Export Year
2000-09-01
  • 0.1bar Low Pressure Gas Pump Nitrogen Booster Pump
  • 0.1bar Low Pressure Gas Pump Nitrogen Booster Pump
  • 0.1bar Low Pressure Gas Pump Nitrogen Booster Pump
  • 0.1bar Low Pressure Gas Pump Nitrogen Booster Pump
  • 0.1bar Low Pressure Gas Pump Nitrogen Booster Pump
  • 0.1bar Low Pressure Gas Pump Nitrogen Booster Pump
Find Similar Products

Basic Info.

Model NO.
GU-GTB-40
Max.Capacity
50-100 L/min
Pressure Medium
Gas
Type
Pressure Test
Position of Pump Shaft
Reciprocating Pump
Certification
ISO
Pressure Ratio
60:1
Air Drive Pressure
3-8bar
Drive Medium
Compressed Air
Working Medium
CO2 Gas
Relative Humidity
<90%
Diameter of Drive Plunger
160mm
Outlet Pressure Control
Drive Air Regulator Valve
Transport Package
Wooden Case
Specification
45kg
Trademark
TEREK
Origin
Jinan
HS Code
8413501090
Production Capacity
12000pieces/Year

Product Description

0.1bar Low Pressure Gas Pump Nitrogen Booster Pump

Product Description

The Terek gas booster equipment uses pure compressed air as the driving power source, and USES gas booster pump as the pressure source, Hydroge ,nitrogen, oxygen, helium,N2O,Argon, CO2 and other gases as the pressurized medium. The output pressure is proportional to the driving gas pressure.

By adjusting the pressure of the driving gas source, the corresponding pressure of the pressurized gas can be obtained.
When the pressure of the driving gas source is balanced with that of the pressurized gas, the pneumatic booster pump will be automatically stops and the output gas pressure is stabilized at the preset pressure. Therefore, it has the features of explosion-proof, energy saving, environmental protection, adjustable output pressure, small volume, light weight, simple operation, reliable performance and wide application range.

To operate this system, The drive gas from the air compressor is required to start the Terek booster pump. The pressure of the drive gas can be adjusted by valves and pressure gauges, and the output gas pressure can be adjusted

The expected working pressure can be achieved by adjusting the pressure of the drive inlet.. When the driving air pressure and the output pressure are balance, the pump stops filling pressure and the output pressure remains at the preset value.

TEREK gas booster pump uses compressed air to drive large area end piston to small area end to get high pressure gas output.. Can be used for compressed air and other gas, the output pressure can be adjusted by inlet valve, The output can ensure gas is not contaminated. Automatic pressure maintaining. Driven by gas, No spark or Flame and No generating heat, Can use it in dangerous places.

 

Product parameters
Basically the principle of operation is similar to a reciprocating amplifier where control of the piston at the end position is reciprocating , The automatic reciprocating motion of the piston is controlled by a built-in four-way valve. TEREK pumps are air driven at a drive air pressure of 3 to 8 bar (29 to 116 psi) by the normal air compressor.

0.1bar Low Pressure Gas Pump Nitrogen Booster Pump
Refer to model technical parameters.

Product name

Pneumatic Air driven gas booster pump Pressurized transfer and filling equipment.

Model

GU-GTB-40

Pressure ratio

40:1

Drive air source pressure

3-8 bar.

Maximum outlet pressure

320 bar (46400 psi)

When the driven air pressure is 5.0bar

High pressure outlet pressure is 200bar.

When the driven air pressure is 6.0bar

High pressure outlet pressure is 240bar.

Min gas inlet pressure

15 bar

Max gas inlet pressure

320 bar

Outlet pressure Control unit

Drive air regulator valve

Power source

TEREK gas booster pump

Pressure control accuracy

less than 1%F.S;

Pressure measurement accuracy

0.4 pressure gauge

Valves and piping

High pressure needle valve and stainless steel piping

Weight

38 KG

Export wooden case Weight

45 KG

Equipment Dimension

580*450*570 mm

Packing size:

610*500*600 mm

Packing Specifications

Standard export wooden case

Connection size(inch) Gas inlet

NPT1/4

Connection size(inch) Gas Outlet

NPT1/4

Production time

12-15 days.


System configuration:

TEREK gas booster pump uses compressed air to drive large area end piston to small area end to get high pressure gas output.. Can be used for compressed air and other gas, the output pressure can be adjusted by inlet valve, The output can ensure gas is not contaminated. Automatic pressure maintaining. Driven by gas, No spark or Flame and No generating heat, Can use it in dangerous places.


GU-GTB series gas booster unit control cabinet mainly includes one sets of GTB series air-driven gas booster pump, pressure gauges, air filter, gas inlet filter, control valves, air regulating valve, pipelines, cabinet, and pressure release valve etc.
In order to ensure the long-term use and stable working efficiency of the equipment, we provide a set of sealing accessories, repair kit, sealing tape, etc .

 

Detailed Images

0.1bar Low Pressure Gas Pump Nitrogen Booster Pump0.1bar Low Pressure Gas Pump Nitrogen Booster Pump0.1bar Low Pressure Gas Pump Nitrogen Booster Pump0.1bar Low Pressure Gas Pump Nitrogen Booster Pump

Product advantages

 

1. All pipes and fittings are made of stainless steel to ensure a long life

2. The pump will stop working automatically when the output pressure reaches the preset value,

3. Maintain long working hours with no energy expenditure

4.No dissipated heat during the pressure holding phase

5.No risk for explosion and spark in oil and gas field

6. The pump will start automatically when the outlet pressure drops slightly or the air drive pressure increases.

7. The working pressure can be adjusted by adjusting the pressure of the driven air. 8.Easy to install, move, use and maintain

0.1bar Low Pressure Gas Pump Nitrogen Booster Pump
Application Fields

1.Pressure test with gas

2.Gas transfer and filling(Argon/Helium/Hydrogen/Oxygen/Nitrogen/CO2/NO2/CH4/LNG/LPG/CNG/FM200 etc.)

3.Charging of gas cylinder and accumulator with nitrogen

4.Supply for isolating gas systems

5. High pressure gas injection system for various industries

6.Transfer of oxygen cylinders

7.Charging of breathing air bottles

8.Leak test

9.Hydrostatic Testing for valves, tanks, pressure vessels, pressure switches, hoses, pipes and tubing, pressure gauges, cylinders, transducers, well casings, gas bottles and air craft components


Packaging & Shipping
0.1bar Low Pressure Gas Pump Nitrogen Booster Pump

0.1bar Low Pressure Gas Pump Nitrogen Booster Pump
 

Our Services

1. We'd like to provide our professional advice regarding machines, materials, packing and market for this product.

2. We'd like to customize special machine according to customer's request.

3. We'd like to help our customers for booking ship as customer request.

5. Operation manual will be provided after shipment.

6. We provide one year warranty.

7. Free wearing parts will be sent together with the machine .

8. Working video of the machine will be sent to you accordingly to your need.

All equipment and accessories are guaranteed for one year. Our sales staff and technical department provide permanent technical advice and operation guidance. If you have any questions about the operation of the equipment, please turn off the air source and equipment, check the instructions in time or contact the sales and service personnel. Thanks.

Equipment inventory and workshop

0.1bar Low Pressure Gas Pump Nitrogen Booster Pump


Company Information:

TEREK Company focus on high pressure fluid transfer all the time and supply perfect high pressure fluid transfer solution and service, Supplying high-quality product and service is the eternal aim of TEREK.
As the experienced manufacturer of industrial booster pump. The technology of air driven booster pump and pressurization system reach to a good level. Can pressurize almost any liquid, Such as oil,water ,corrosive liquid and chemical liquid applications. High quality seals, long service life available.
Based on the high quality of our products, reasonable prices and excellent after-sales service, we have gained a high reputation in this field of fluid pressure control equipment.

Our main products including Pneumatic Gas/Liquid Booster Pumps. Refrigerant booster pump and Air Amplifier. Fluid pressurized hydrostatic hydraulic pressure test equipment or high pressure Chemical fluid injection equipment. High pressure oxygen, hydrogen ,nitrogen, argon, Helium ,N2O,CO2 or other gas pressurized transfer refilling equipment or gas injection equipment. Pneumatic pump Glycerin Oil pressurized injection equipment. LPG / Propane and butane Pressurized transfer filling station equipment. Pipe/tube/valve/cylinder/Brake pipe, automobile pipe, aircraft hydraulic pipe ,pressure vessels Hydraulic Pressure Test Machine(Computer control or manual control or Intelligent digital display instrument) MCU Intelligent digital display instrument Pneumatic gas booster pump system leak test bench. Computer control /Intelligent instrument control Safety relief valve PSV test bench,Portable Safety valve test clamping table and test equipment. Online safety valve test instrument equipment.

 

0.1bar Low Pressure Gas Pump Nitrogen Booster Pump

FAQ

1.Q : Are you manufacturer ?

A: Yes, We are the manufacturer with continuous and improved R&D. Production, Quality Check and service supply.

2.Q : Can I get your price list ?

A: Yes, Sure. In order to send you our available offered price. Please choose the products and let us know the product model and requirement in detail.

3.Q : Do you have stock for all items?

A:In general, we have some stock, while if you need a bulk order, we still need time to produce it. Of course, we will inform all details you before your payment.

4.Q : What is payment terms ?

A: Sample order : 100% full payment before start to production;

Large order : 30% deposit first, 70% pay after see the BL copy ;

5.Q: Can give free sample ?

A : Free : if small spare parts and the cost not too much is ok ;

Not Free : the cost expensive and all the machine can not be free ;

6.Q : How long can be finished the goods ?

Delivery date: 10-15 working days after deposit paid

Two years warranty, when the products reach to destination.

0.1bar Low Pressure Gas Pump Nitrogen Booster Pump

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier