| After-sales Service: | 24 Months |
|---|---|
| Warranty: | 24 Months |
| Max.Capacity: | 300-400 L/min |
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier 
Product Description
The Terek gas booster equipment uses pure compressed air as the driving power source, and USES gas booster pump as the pressure source, Hydroge ,nitrogen, oxygen, helium,N2O,Argon, CO2 and other gases as the pressurized medium. The output pressure is proportional to the driving gas pressure.
By adjusting the pressure of the driving gas source, the corresponding pressure of the pressurized gas can be obtained.
When the pressure of the driving gas source is balanced with that of the pressurized gas, the pneumatic booster pump will be automatically stops and the output gas pressure is stabilized at the preset pressure. Therefore, it has the features of explosion-proof, energy saving, environmental protection, adjustable output pressure, small volume, light weight, simple operation, reliable performance and wide application range.
To operate this system, The drive gas from the air compressor is required to start the Terek booster pump. The pressure of the drive gas can be adjusted by valves and pressure gauges, and the output gas pressure can be adjusted .The expected working pressure can be achieved by adjusting the pressure of the drive inlet.. When the driving air pressure and the output pressure are balance, the pump stops filling pressure and the output pressure remains at the preset value.
TEREK gas booster pump uses compressed air to drive large area end piston to small area end to get high pressure gas output.. Can be used for compressed air and other gas, the output pressure can be adjusted by inlet valve, The output can ensure gas is not contaminated. Automatic pressure maintaining. Driven by gas, No spark or Flame and No generating heat, Can use it in dangerous places.
Product parameters
Basically the principle of operation is similar to a reciprocating amplifier where control of the piston at the end position is reciprocating , The automatic reciprocating motion of the piston is controlled by a built-in four-way valve.
TEREK pumps are air driven at a drive air pressure of 3 to 8 bar (29 to 116 psi) by the normal air compressor.
Refer to model technical parameters.
| Product name | Pneumatic Air driven gas booster pump Pressurized transfer and filling equipment. |
| Model | GU-GTC-40 |
| Pressure ratio | 40:1 |
| Drive air source pressure | 3-8 bar. |
| Maximum outlet pressure | 320 bar (46400 psi) |
| When the driven air pressure is 5.0 bar | High pressure outlet pressure is 200bar. |
| When the driven air pressure is 6.0 bar | High pressure outlet pressure is 240bar. |
| Min gas inlet pressure | 15 bar |
| Max gas inlet pressure | 320 bar |
| Outlet pressure Control unit | Drive air regulator valve |
| Pressure control accuracy | less than 1%F.S; |
| Pressure measurement accuracy | 0.4 pressure gauge |
| Valves and piping | High pressure needle valve and stainless steel piping |
| Equipment Weight | 52 KG |
| Export wooden case total Weight | 62 KG |
| Equipment Dimension | 700*500*650 mm |
| Packing size: | 770*560*680 mm |
| Packing Specifications | Standard export wooden case |
| Connection size(inch) Gas inlet | NPT 1/4 Internal Thread |
| Connection size(inch) Gas Outlet | NPT 1/4 Internal Thread |
| Production time | 12-15 days. |
System configuration:
GU-GTC series gas booster unit control cabinet mainly includes one sets of GTC series air-driven gas booster pump, pressure gauges, air filter, gas inlet filter, control valves, air regulating valve, pipelines, cabinet, and pressure release valve etc.
The diameter of the drive cylinder:160mm
Drive cylinder stroke:100mm High pressure Cylinder stroke:100mm
The maximum driving pressure of the drive air is 8 bar/116psi
Detailed Images
Product advantages
1. All pipes and fittings are made of stainless steel to ensure a long life
2. The pump will stop working automatically when the output pressure reaches the preset value,
3. Maintain long working hours with no energy expenditure
4.No dissipated heat during the pressure holding phase
5.No risk for explosion and spark in oil and gas field
6. The pump will start automatically when the outlet pressure drops slightly or the air drive pressure increases.
7. The working pressure can be adjusted by adjusting the pressure of the driven air. 8.Easy to install, move, use and maintain
Application Fields
Application : Gas transfer and filling(Argon/Helium/Hydrogen/Oxygen/Nitrogen/CO2/NO2/CH4/LNG/LPG/CNG/FM200 etc.)
Charging of gas cylinder and accumulator with nitrogen and High pressure gas injection system for various industries
1. Reliable, easy to maintain, compact and robust
2. No heat, flame or spark risk 3. Infinitely variable cycling speed and output
4. Pneumatic driven units do not require electrical connections 5. Easy to apply automatic controls
6. No limit or adverse affect to continuous stop/start applications
7. Seal systems designed for long working life 8. No air line lubricator required
9. Hydrocarbon free - separation between air and gas sections
10. Built-in cooling (most models) 11. Suitable for most gases
12. Ability to stall at any predetermined pressure and hold the fixed pressure without consuming power or generating heat
Packaging & Shipping
Our Services
1. We'd like to provide our professional advice regarding machines, materials, packing and market for this product.
2. We'd like to customize special machine according to customer's request.
3. We'd like to help our customers for booking ship as customer request.
5. Operation manual will be provided after shipment.
6. We provide two year warranty.
7. Free wearing parts will be sent together with the machine .
8. Working video of the machine will be sent to you accordingly to your need.
All equipment and accessories are guaranteed for one year. Our sales staff and technical department provide permanent technical advice and operation guidance. If you have any questions about the operation of the equipment, please turn off the air source and equipment, check the instructions in time or contact the sales and service personnel. Thanks.
Equipment inventory and workshop
Company Information
TEREK Company focus on high pressure fluid transfer all the time and supply perfect high pressure fluid transfer solution and service, Supplying high-quality product and service is the eternal aim of TEREK.
As the experienced manufacturer of industrial booster pump. The technology of air driven booster pump and pressurization system reach to a good level. Can pressurize almost any liquid, Such as oil,water ,corrosive liquid and chemical liquid applications. High quality seals, long service life available.
FAQ : Company Information.
1.Q : Are you manufacturer ?
A: Yes, We are the manufacturer with continuous and improved R&D. Production, Quality Check and service supply.
2.Q : Can I get your price list ?
A: Yes, Sure. In order to send you our available offered price. Please choose the products and let us know the product model and requirement in detail.
3.Q : Do you have stock for all items?
A:In general, we have some stock, while if you need a bulk order, we still need time to produce it. Of course, we will inform all details you before your payment.
4.Q : What is payment terms ?
A: Sample order : 100% full payment before start to production;
Large order : 30% deposit first, 70% pay after see the BL copy ;
5.Q: Can give free sample ?
A : Free : if small spare parts and the cost not too much is ok ;
Not Free : the cost expensive and all the machine can not be free ;
6.Q : How long can be finished the goods ?
Delivery date: 5-30 working days after deposit paid
Two years warranty, when the products reach to destination.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}